Skip to main content
CertRampLearning

ISTQB · Free practice questions

ISTQB CTAL-TA Practice Questions

15 original CTAL-TA practice questions across all five chapters of the ISTQB Advanced Level Test Analyst syllabus v4.0, weighted roughly like the real exam, with the most questions on test analysis and test design. Each one comes with the answer, a short explanation and the reason every other option is wrong.

Written for the syllabus v4.0 (released 2 May 2025) · Updated October 27, 2026

These are original practice questions written by CertRamp to the official ISTQB exam outline. They are not real exam questions and do not come from any exam. Try each question first, then open the answer to see the explanation for every option.

Domain 1

The Tasks of the Test Analyst in the Test Process

TA-1.3.1 Differentiate between high-level test cases and low-level test casesFoundationDomain: The Tasks of the Test Analyst in the Test Process

Question 1. An agile team with experienced testers works on a product whose requirements change every sprint. Test cases must stay maintainable and leave room for the tester's judgement during execution. Which kind of test case suits this situation best?

  1. Option A: Low-level test cases with concrete input values and exact expected results
  2. Option B: High-level test cases without concrete values for inputs and expected results
  3. Option C: Test charters only, with no test cases at all
  4. Option D: Low-level test cases generated from the code
Show answer and explanation

Correct answer: B. High-level test cases without concrete values for inputs and expected results

High-level test cases describe what to test without fixing concrete data, so they need less rework when requirements change and use the tester's experience. Low-level test cases are preferred when reproducibility, auditability or automation matter more.

  • A (incorrect)Low-level test cases suit inexperienced testers, regulatory needs or automation, but they are costly to maintain when requirements change often.
  • B (correct)Correct. High-level (logical) test cases are easier to maintain under changing requirements and let experienced testers vary the data during execution.
  • C (incorrect)Charters support session-based testing, but the question asks which kind of test case fits; dropping test cases entirely is not implied by the scenario.
  • D (incorrect)Deriving test cases from code is a white-box approach and does not address maintainability under changing requirements.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-1.3.4 Explain the test oracle problem and potential solutionsIntermediateDomain: The Tasks of the Test Analyst in the Test Process

Question 2. A logistics system computes optimised delivery routes. For realistic inputs, nobody can calculate the correct optimal route by hand, so testers cannot write exact expected results. Which approach addresses this test oracle problem?

  1. Option A: Skip result checking and only verify that the system does not crash
  2. Option B: Ask the developers which output the code is supposed to produce
  3. Option C: Check relations between the results of related executions, for example that removing a delivery stop never makes the route longer
  4. Option D: Increase the number of test cases until a defect appears
Show answer and explanation

Correct answer: C. Check relations between the results of related executions, for example that removing a delivery stop never makes the route longer

The test oracle problem arises when expected results are hard or impossible to determine. Partial oracles (such as relations between source and follow-up test results, plausibility checks or comparison with another implementation) let you detect failures without knowing the exact result.

  • A (incorrect)Crash-only checking avoids the oracle problem rather than solving it and misses incorrect results.
  • B (incorrect)Deriving expected results from the implementation risks confirming the defects in it; the developers face the same oracle problem.
  • C (correct)Correct. Checking properties that must hold between related test runs (as in metamorphic testing) is a recognised way to test when exact expected results are unavailable.
  • D (incorrect)More test cases do not help if you cannot decide whether an individual result is correct.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-1.3.6 Use keyword-driven testing to develop test scriptsIntermediateDomain: The Tasks of the Test Analyst in the Test Process

Question 3. A keyword library contains: OpenApp, Login(user, password), VerifyMessage(text), VerifyPage(name) and Logout. Which keyword sequence tests that a registered user who enters a wrong password sees the error message "Invalid credentials" and stays on the login page?

  1. Option A: OpenApp, Login("anna", "wrong"), VerifyPage("Home"), Logout
  2. Option B: OpenApp, Login("anna", "correct"), VerifyMessage("Invalid credentials")
  3. Option C: Login("anna", "wrong"), Logout, VerifyMessage("Invalid credentials")
  4. Option D: OpenApp, Login("anna", "wrong"), VerifyMessage("Invalid credentials"), VerifyPage("Login")
Show answer and explanation

Correct answer: D. OpenApp, Login("anna", "wrong"), VerifyMessage("Invalid credentials"), VerifyPage("Login")

In keyword-driven testing, each keyword represents an action or check with its own data. A complete test script needs the setup, the action under test and verifications for every expected result.

  • A (incorrect)Checks that the user reaches the home page, which is the opposite of the expected behaviour.
  • B (incorrect)Uses a valid password, so the error message should not appear.
  • C (incorrect)Misses OpenApp, and Logout makes no sense for a user who never logged in.
  • D (correct)Correct. It starts the application, performs the invalid login and checks both the message and that the login page is still shown.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

Domain 2

The Tasks of the Test Analyst in Risk-Based Testing

TA-2.2.1 Analyze the impact of changes to determine the scope of regression testingAdvancedDomain: The Tasks of the Test Analyst in Risk-Based Testing

Question 4. A shared tax calculation component is changed to support a new tax rate. The component is called by the invoicing and payroll modules; the reporting module only reads stored invoice totals. Time allows only part of the regression suite to be run. Which regression scope is most appropriate?

  1. Option A: Tests of the tax component plus the invoicing and payroll tests that exercise tax calculation, prioritised by risk
  2. Option B: Only the new tests for the new tax rate
  3. Option C: The reporting tests only, because reports show the final figures
  4. Option D: A random selection of tests from the whole suite
Show answer and explanation

Correct answer: A. Tests of the tax component plus the invoicing and payroll tests that exercise tax calculation, prioritised by risk

Regression scope comes from analysing which parts of the system are affected by a change, directly or through dependencies. With limited time, the test analyst selects and prioritises the regression tests that cover the highest-risk impacted areas.

  • A (correct)Correct. Impact analysis follows the dependencies of the changed component, and risk-based prioritisation fits the limited time.
  • B (incorrect)Confirms the new behaviour but leaves unchanged functionality that depends on the component without regression testing.
  • C (incorrect)Reporting reads stored values and is only indirectly affected; it misses the directly dependent modules.
  • D (incorrect)Random selection ignores the impact analysis and may skip the most affected areas.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

Domain 3

Test Analysis and Test Design

TA-3.1.1 Apply domain testingIntermediateDomain: Test Analysis and Test Design

Question 5. An integer input x is valid when x ≤ 100. Which set of test values achieves simplified domain coverage for this border?

  1. Option A: 99 and 100
  2. Option B: 100 and 101
  3. Option C: 100 only
  4. Option D: 99 and 101
Show answer and explanation

Correct answer: B. 100 and 101

Domain testing uses ON, OFF, IN and OUT points. For a border defined with ≤, the ON point is the border value and the OFF point the closest value outside the domain; simplified domain coverage requires one of each.

  • A (incorrect)Both values are inside the domain; there is no OFF point.
  • B (correct)Correct. For a closed border (≤), the ON point lies on the border (100) and the OFF point just outside it (101).
  • C (incorrect)Simplified domain coverage needs one ON and one OFF point for a ≤ border.
  • D (incorrect)99 is an IN point, not an ON point; the border value itself is not tested.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-3.1.2 Apply combinatorial testingIntermediateDomain: Test Analysis and Test Design

Question 6. A web shop must be tested with three configuration parameters, each with two values: browser (Chrome, Firefox), payment (card, invoice) and language (EN, DE). What is the minimum number of test cases that achieves pairwise coverage?

  1. Option A: 2
  2. Option B: 3
  3. Option C: 4
  4. Option D: 8
Show answer and explanation

Correct answer: C. 4

Pairwise coverage requires every value of each parameter to be combined with every value of every other parameter at least once. The lower bound is the product of the two largest parameter value counts, here 2 × 2 = 4, compared with 8 for all combinations.

  • A (incorrect)Two test cases cannot cover all four value pairs of any two parameters.
  • B (incorrect)Each pair of parameters has 2 × 2 = 4 value pairs, so at least 4 test cases are needed.
  • C (correct)Correct. Four test cases can cover all four value pairs of every two parameters, for example C-card-EN, C-invoice-DE, F-card-DE, F-invoice-EN.
  • D (incorrect)Eight is the number of all combinations (2 × 2 × 2), which pairwise testing is designed to reduce.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-3.2.2 Apply state transition testingIntermediateDomain: Test Analysis and Test Design

Question 7. A risk assessment requires that every sequence of two consecutive valid transitions in a state model is exercised by the tests. Which coverage criterion fulfils this requirement?

  1. Option A: 1-switch coverage
  2. Option B: 0-switch coverage
  3. Option C: All states coverage
  4. Option D: Round-trip coverage
Show answer and explanation

Correct answer: A. 1-switch coverage

0-switch coverage exercises each valid transition once; 1-switch coverage exercises every sequence of two consecutive valid transitions. Higher N-switch levels grow quickly in size and are usually reserved for high-risk components.

  • A (correct)Correct. N-switch coverage covers sequences of N+1 consecutive transitions, so 1-switch coverage covers all sequences of two transitions.
  • B (incorrect)0-switch coverage (valid transitions coverage) covers each single transition, not sequences of two.
  • C (incorrect)Visiting every state does not guarantee that every transition, let alone every pair of transitions, is exercised.
  • D (incorrect)Round-trip coverage targets loops that start and end in the same state, not all pairs of consecutive transitions.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-3.3.1 Apply decision table testingAdvancedDomain: Test Analysis and Test Design

Question 8. A full decision table with three Boolean conditions has eight columns. Two of the columns describe combinations that can never occur. The current tests exercise three of the remaining columns. What is the decision table coverage?

  1. Option A: 37.5%
  2. Option B: 60%
  3. Option C: 75%
  4. Option D: 50%
Show answer and explanation

Correct answer: D. 50%

Decision table coverage counts only feasible columns, because infeasible combinations cannot be tested. Identify and remove infeasible columns first, then measure coverage against what remains.

  • A (incorrect)Divides by all eight columns; infeasible columns are excluded from the coverage calculation.
  • B (incorrect)This is 3 / 5. Only two of the eight columns are infeasible, so six feasible columns remain.
  • C (incorrect)Divides three by four, which would be the count after removing four columns, not two.
  • D (correct)Correct. Coverage is the number of exercised feasible columns divided by all feasible columns: 3 / 6 = 50%.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-3.3.2 Apply metamorphic testingIntermediateDomain: Test Analysis and Test Design

Question 9. Testers of a product search have no way to know the correct number of results for any query against the live catalogue. Which statement is a valid metamorphic relation they can use?

  1. Option A: The search for "shoes" must return exactly 1,250 results
  2. Option B: Every search must complete within two seconds
  3. Option C: Adding a further filter to a search must never return more results than the original search
  4. Option D: The search must return at least one result for every query
Show answer and explanation

Correct answer: C. Adding a further filter to a search must never return more results than the original search

A metamorphic relation describes how a change to the input of a source test case should affect the result of the follow-up test case. It lets testers find failures where no test oracle for individual results exists.

  • A (incorrect)This is an exact expected result, which is precisely what the testers cannot determine.
  • B (incorrect)This is a performance requirement, not a relation between source and follow-up test results.
  • C (correct)Correct. It relates the result of a follow-up test (filtered search) to the result of the source test without needing the exact count.
  • D (incorrect)This is not true in general and does not relate two executions to each other.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-3.2.1 Explain CRUD testingFoundationDomain: Test Analysis and Test Design

Question 10. While checking a CRUD matrix, a test analyst notices that no function in the system ever deletes a "Customer" entity, although data protection rules require it. Which part of CRUD testing has revealed this problem?

  1. Option A: Completeness testing
  2. Option B: Consistency testing
  3. Option C: Random testing
  4. Option D: Scenario-based testing
Show answer and explanation

Correct answer: A. Completeness testing

CRUD testing verifies the life cycle of data entities. Its static part checks the matrix for missing operations; its dynamic part executes tests to check that the operations work together consistently.

  • A (correct)Correct. Completeness testing is a static check that each of the create, read, update and delete operations occurs for every entity.
  • B (incorrect)Consistency testing is dynamic and checks that functions interact correctly on entities, for example reading an entity that was never created.
  • C (incorrect)Random testing selects inputs at random and is not based on a CRUD matrix.
  • D (incorrect)Scenario-based testing uses sequences of interactions; it is not the check for missing operations in a CRUD matrix.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-3.4.1 Prepare test charters for session-based testingFoundationDomain: Test Analysis and Test Design

Question 11. Which mission statement is written in the recommended format for a test charter in session-based testing?

  1. Option A: Test the checkout and log all defects found
  2. Option B: Execute test cases TC-101 to TC-140 on the checkout page
  3. Option C: Checkout must accept all valid card numbers
  4. Option D: Explore the checkout with expired and blocked cards to discover how payment errors are handled
Show answer and explanation

Correct answer: D. Explore the checkout with expired and blocked cards to discover how payment errors are handled

A test charter's mission names the target, the resources and the information the session should discover. Further charter content, such as duration, scope, risks and historical defects, is optional and depends on the context.

  • A (incorrect)It names an area but no resources and no information to be discovered.
  • B (incorrect)This describes scripted test execution, not an exploratory mission.
  • C (incorrect)This is a requirement, not a mission for an exploratory session.
  • D (correct)Correct. It follows the format Explore [target] with [resources] to discover [information].

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

Domain 4

Testing Quality Characteristics

TA-4.3.1 Explain how the test analyst contributes to adaptability and installability testingFoundationDomain: Testing Quality Characteristics

Question 12. A business application must run without changes on three different cloud service platforms. The test analyst identifies the target environments and designs tests for combinations of them. Which quality (sub-)characteristic is being tested?

  1. Option A: Interoperability
  2. Option B: Adaptability
  3. Option C: Functional correctness
  4. Option D: Learnability
Show answer and explanation

Correct answer: B. Adaptability

Adaptability testing checks that the product works in its intended target environments, such as different platforms, operating systems or browsers. The test analyst identifies those environments and covers relevant combinations.

  • A (incorrect)Interoperability concerns exchanging information with other systems and using it, not running in different environments.
  • B (correct)Correct. Adaptability, part of flexibility, is about how well a product can be adapted to different environments such as platforms.
  • C (incorrect)Functional correctness is about whether functions produce correct results, independent of the platform.
  • D (incorrect)Learnability is part of usability and concerns how easily users learn the product.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-4.2.1 Explain how the test analyst contributes to usability testingIntermediateDomain: Testing Quality Characteristics

Question 13. A team wants to evaluate how easily first-time customers can complete an online loan application. Which approach is most appropriate?

  1. Option A: Testers who know the application well complete the form as quickly as possible
  2. Option B: A developer guides customers through each step and answers their questions
  3. Option C: Representative users perform realistic tasks while being observed without help
  4. Option D: An automated script measures the response time of each page
Show answer and explanation

Correct answer: C. Representative users perform realistic tasks while being observed without help

Usability testing tells you how real users experience a product. It relies on representative participants, realistic tasks and unobtrusive observation, so that difficulties appear as they would in real use.

  • A (incorrect)Experienced testers do not represent first-time customers and will not show their difficulties.
  • B (incorrect)Guiding participants hides the very problems the test is supposed to find.
  • C (correct)Correct. Usability testing needs representative users performing realistic tasks, observed rather than guided.
  • D (incorrect)Response time is a performance characteristic, not usability.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

Domain 5

Software Defect Prevention

TA-5.3.1 Analyze test results to identify potential improvements to defect detectionAdvancedDomain: Software Defect Prevention

Question 14. During system testing, 40 defects were found. Later, 10 further defects that system testing should have detected were found in acceptance testing and production. What is the defect detection percentage (DDP) of system testing, and what does it tell you?

  1. Option A: 80%: system testing contained most, but not all, of the defects it was responsible for
  2. Option B: 25%: the escaped defects are a quarter of the defects found
  3. Option C: 75%: system testing found three in four defects
  4. Option D: 100%, all 40 defects found in system testing were fixed
Show answer and explanation

Correct answer: A. 80%: system testing contained most, but not all, of the defects it was responsible for

DDP per phase shows how well a test level catches the defects it should find. Analysing it, together with where defects cluster, helps the test analyst decide where to strengthen detection.

  • A (correct)Correct. DDP = defects found in the phase / (found + escaped) = 40 / (40 + 10) = 80%, a measure of phase containment.
  • B (incorrect)10 / 40 is the ratio of escaped to found defects, not DDP.
  • C (incorrect)This is (40 − 10) / 40. DDP divides the defects found in the phase by the sum of found and escaped defects.
  • D (incorrect)Fixing defects does not change how many escaped; DDP measures detection, not correction.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

TA-5.2.2 Apply a review technique to a test basis to find defectsIntermediateDomain: Software Defect Prevention

Question 15. Reviewers of a banking app's requirements each take on a specific persona (a first-time customer, a branch employee and a customer with impaired vision) and evaluate the requirements from that viewpoint. Which review technique is being applied?

  1. Option A: Ad hoc review
  2. Option B: Checklist-based review
  3. Option C: Scenario-based review
  4. Option D: Role-based review
Show answer and explanation

Correct answer: D. Role-based review

Review techniques help find defects in the test basis early, supporting phase containment. Role-based reviews add value by making reviewers look at the work product from distinct user and stakeholder viewpoints.

  • A (incorrect)Ad hoc reviews have no structure or assigned viewpoints, which often leads to duplicate findings.
  • B (incorrect)Checklist-based reviews work through predefined questions, not assigned personas.
  • C (incorrect)Scenario-based reviews use dry runs of expected use; they are not defined by reviewers taking on user roles.
  • D (correct)Correct. In role-based reviews, reviewers evaluate the work product from the perspective of individual stakeholder roles, often described as personas.

Reference: ISTQB: CTAL-TA Syllabus v4.0 (opens in a new tab)

Want more practice?

15 questions are a sample. The exam is 45 items.

The full CertRamp ISTQB CTAL-TA practice exams have 6 tests that grow with you, from a diagnostic start to an exam-level Test 4 and a challenge set beyond the exam, with an explanation for every option.

Who writes the exams

Written by a practitioner, not a question mill

Joshua Ravnjak, founder of CertRamp Learning

Joshua Ravnjak

Senior Consultant, digital transformation and AI

Founder, CertRamp Learning

921 learners and 61 reviews on Udemy (as of November 3, 2026)

I have more than 12 years of professional experience and work as a senior consultant in an IT management consultancy, focusing on digital transformation, AI and requirements engineering in the insurance industry. I have earned many certifications myself, so I know what exam preparation feels like. That is why every CertRamp practice exam follows the same progression: an easy start to see where you stand, then real exam level, then beyond it. You walk into the exam with a buffer and a good feeling.

Selected certifications

  • IREB® CPRE Foundation Level
  • ITIL® 4 Foundation
  • Professional Scrum Master I (PSM I)
  • Professional Scrum Product Owner I (PSPO I)
  • Certified SAFe® 6 Scrum Master
  • Certified AI-Empowered SAFe® 6 Product Owner/Product Manager

Plus further certifications from Microsoft and Anthropic (Claude).

ITIL® is a registered trademark of PeopleCert. IREB® is a registered trademark of IREB e.V. SAFe® is a registered trademark of Scaled Agile, Inc. PSM and PSPO are trademarks of Scrum.org.

Also in print

Cover: CPRE Foundation Level Prüfungsvorbereitung 2026 by Joshua Ravnjak

CPRE Foundation Level Prüfungsvorbereitung 2026

6 Übungsprüfungen mit 270 Fragen und ausführlichen Erklärungen

Paperback, German, October 2026

My CPRE Foundation Level exam-prep book (in German) follows the same progressive approach.

View on Amazon (opens in a new tab)